SOLUTIONS FOR ALL YOUR NEEDS
Automotive Test Solutions
selector
Ultra Compact Simulators for Automotive Transients
Highlights- Built-in EFT/Burst generator module
- Built-in Micropulse generator module (ISO 7637, JASO, SAE and NISSAN)
- Built-in coupling network 60V, up to 200A
- Built-in battery switch
- Overcurrent protection
- ...
Generates and records automotive waveforms
Highlights- Dual-Processor-Technology, 500kS/s sample rate
- 4-channel arbitrary generator
- 2-channel transient recorder
- Simultaneous recording/generation
- Library of standard test routines
- ...
Voltage Drop Simulator - Battery supply simulation and DC voltage source
Highlights- Voltage up to 60V
- Current up to 200A (peak up to 1,000A)
- Bipolar-amplifier models available
- Low output impedance
- Powerful DC voltage source
- ...
Load Dump Generator
Highlights- Load Dump generator according to ISO 7637, ISO 16750-2, SAE J1113, SAE J1455, JASO, Nissan and most car manufacturer requirements
- Generates Clipped Load Dump pulses
- Built-in 0.5 - 38 Ohm source impedance, selectable in 0.1 Ohm steps
- Pulse duration up to 1,200ms
- Built-in coupler 60V/30A, extendable to 200A
- ...
Low frequency signal source DC (0Hz) to 250kHz
Highlights- Built-in DDS to generate sinusoidal signals up to 250kHz
- Built-in LF amplifier, 250W
- Output voltage max. 140V p-p, 50V rms
- Output current max. 5A rms
- Programmable DC voltage offset
- ...
Low frequency signal source DC (0Hz) to 250kHz, 800W
Highlights- Built-in DDS to generate sinusoidal signals up to 250kHz
- Built-in LF amplifier, 800W
- Output voltage max. 140V p-p, 50V rms
- Output current max. 16A rms
- Supports German Lloyd VI-7-2
- ...
Audio transformer assembly for LF conducted immunity testing
Highlights- One-box transformer and 0.5ohm load assembly
- Frequency response 10Hz to 250kHz
- Secondary saturation 50A per transformer
- Audio power 2 x 200W
- Freely configurable on primary/secondary; serial, parallel, single
- ...
Automotive Power Fail Simulator
Highlights- Standalone test generator for voltage dips and interruptions
- Rise/fall time 1us
- Electronic short-circuit protection
- Rated voltage 60V DC
- Front panel operation
- ...
Continuous Wave Simulator
Highlights- Most compact equipment
- Supports BCI testing as per various standard requirements
- Basic frequency range 9kHz up to 400MHz
- Extendable frequency range up to 1GHz
- Built-in 100W class A amplifier up to 400MHz
- ...
Simulator for low frequencies 10 Hz - 250 kHz
Highlights- Most compact equipment for ripple noise on ac/dc supplies and magnetic fields
- Built-in LF signal generator
- Built-in LF amplifier
- Built-in LF transformer 2:1
- Built-in frequency-selective voltage and current meter
- ...
Electrostatic Discharge Simulator up to 30kV
Highlights- Test voltage up to 30kV for air and contact discharge
- Discharges up to 20Hz
- Easy-to-change R/C-networks and tips
- Bleed-Off function
- Measurement of temperature and humidity
- ...
Automotive Transient Emission Measurements as per ISO 7637-2
Highlights- BS 200N100 - Electronic switch, 60V DC/100A:
- - Volt.Drop <1.2V@100A, <0.2V@25V
- - Peak voltage max. 1,000V
- - Reverse-polarity/short-circuit protected
- BSM 200N40 - Mechanical switch, 16V DC/40A
- ...
Load Impedance for BS200Nx Electronic Switches
Highlights- Verification load for electronic switch 0.6ohm / 50uH as per ISO 7637-2:2004
- Max. supply voltage 28VDC
- Max. load current 50A
- Additional shunt resistors 10ohm, 20ohm, 40ohm, 120ohm built-in for emission measurement
- Over-temperature protected
Transient Immunity Test Generator meeting FORD EMC-CS-2009.1
Highlights- Approved by Ford acc. to EMC-CS-2009.1 requirements
- Pulses CI 220: A1, A2-1, A2-2, C-1 and C-2
- Pulse CI 260: F
- Pulses RI 130: A2-1, A2-2 using a coupling test fixture
- Fixed repetition times and pseudo-random timing
- ...
Transient Immunity Test Generator as per FORD ES-XW7T-1A278-AC
Highlights- As per Ford ES-XW7T-1A278-AC, Annex G, Figs. G-1/G-2
- Pulses CI 220: Pulses A1, A2, B1, B2 and C
- Pulse CI 260: Pulse F
- Strictly using components as per Ford requirements
- Fixed repetition times and pseudo-random timing
- ...
Load Dump Generator
Highlights- Load Dump generator as per Toyota Specification
- Generates Field Decay and Spark Test pulses
- Built-in DC switch for Spark Test
- Built-in coupling network for 60V/25A DC
- Front panel operation
- ...
Load Dump Generator
Highlights- Load Dump generator as per Toyota Specification
- Generates pulses Test 1, Test 2 and Test 3
- Built-in coupling network for 60V/25A DC
- Front panel operation
- Standard Test routines
- ...
Micropulse Generator
Highlights- Standalone test generator
- Test Voltage up to 1,100V
- Includes 30, 50, 100, 150 and 200ohm source impedance
- Built-in electronic battery switch
- Built-in CDN 60V/25A DC
- ...
Micropulse Generator
Highlights- Standalone test generator
- Test Voltage up to 1,100V
- 6 different source impedance values
- Built-in electronic battery switch
- Built-in CDN 60V/25A DC
- ...
Calibration set for automotive transients
Highlights- One single load resistor box
- Includes all required load resistor values
- Highly accurate resistors (+/-1%)
- High temperature stability
- Resistors with very low inductance
- ...